Take the six 3/8" bolts out from under the frame. 9/16" socket and a ratchet and a 9/16" gear wrench for the two that are over the axle. Then you can pull it with the motor plate. Drive shaft will slip out of the CV joint that is bolted to the engine so no need to deal with that. Fuel line, choke and throttle cable electric and your good to go.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|