Pull the Drive Shaft and Coupler to expose the Input Shaft. You can try & pull the Seal or you can remove the Charge Pump to get at the seal better. You will need IH-394847-R91------>921-3032 Seal. Once the new seal is installed, reverse your steps.
NOTE: IF.........you pull the Charge Pump, pay attention to the "flat spot" on the side of the charge pump housing, and the orientation (RH or LH side). Install the same way it came off.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|