[fried]

Hey guys. Thanks for all the responses and feedback. I don't have a drill big enough to turn the shaft. I made a poor attemp to rig up something to my drill to turn the motor as the generator would. See attached pic.... Holds the generator pulley fine but barely enough tension on the belt to get the motor rpm going.

I have some hytran on order along with a hydraulic rated filter. I'll try and get the old drained out ahead of time and go ahead and change the engine oil too.

I don't have any PB Blaster here but mixed up some ATF and acetone to drop on the valves. They move MUCH better now.