Ordered some parts from Jeff, got cork gaskets in the mail so reinstalled the hydro, replaced the engine side coupler, (good thing, the aluminum cup that it bolts to was shot as well) took steering column apart and cleaned all of the old grunge out/ regreased it with fresh. Hydro linkage seems to be a little loose, don't see any adjustments possible to tighten it up, will have to see once I get everything hooked back up, will fire it up on a jack to see, before I put the body back on.... hopefully if it walks down towards neutral, the linkage on the parts 129 is in better shape.... I will need to get new tie rod ends for the link from the shift rod to the shift linkage on the trans anyways.
|