Make sure you blow both heads/cylinder fins off, paying attention to the build up around the magneto as the heat build up there tends to kill it prematurely.
As far as the gaskets, you can order online, evil pay or local mower shop.
Partstree.com is where you will find the part numbers.
The bolts are 1/4-20, available at fleet supply, tractor supply, hardware stores,
just take your old one to duplicate.
If your threaded holes are a bit stripped, just tap them deeper with a
"bottom" tap, and use longer bolts, you might have to cut a longer one off a bit,
in-other-words, custom fit the length, and use lock washers.
|