Quote:
Originally Posted by CC2140
John,
I can see spark but I am thinking it may be weak. I was going to pull the engine to get at the ignition on the flywheel to see if it was rusted on the magnet making a poor connection. I do have another spark plug that I can sacrafice I will try that.
The plug looked a little wet nothing like it was in the past. I then dried it off and tried the starter fluid and nothing.
I even hooked a drill up to the pull start and cranked it probably 100 times and nothing.
|
The drill motor on the flywheel nut with socket is a trick I use.
While it is whirling over stick the lit propane torch in the plug hole to burn any accumulated fuel out of the crankcase/cyl.
Again,
is the exhaust clear?? they will not even put, much less run with it clogged.