Quote:
Originally Posted by J-Mech
Find a different shop!!!!
Crank grind should cost $50. No more!
Bore and valve job less than $100. No more! (If they hot tank and crack check it you may hit the $100 mark.)
That shop is OVERPRICED!
You should be able to rebuild the whole thing including machining for around $350.
|
Yeah they do really nice work though... I will see what I can come up with, machine shops are not very abundant around here. I'm sure he is marking up the grind so that is not helping. Plus, the quote included surfacing the block and head, want to make sure it is flat!
Also looks like I will need a governor gear, the plastic surface that contacts the block seems to be melted; I was able to find one cheap on ebay though.