The steering box on this 1772 was pushing oil out of the top near the wheel so says the previous owner so I figured it needed rebuilt(re-gasketed).
I pulled the engine and drive shaft, this one is getting the "MacDrive Shaft" conversion, thanks Sam.
DSCN0837.jpg
I pulled the rear cover last week and drained all the Hytran and crap out of it so the rear is dry at this time so I layed her on her side to ease the removal of the column.
DSCN0871.jpgDSCN0872.jpg
Got the steering column out and put it in the vice to bust it apart.
DSCN0875.jpg
I took lots of pics to make sure it all goes back together like it came apart. Here is what they look like inside. This is the first plate removed.
DSCN0885.jpg