[mrjeep81]

Sure. The far right will raise/lower the deck in normal fashion, that lever will also run to quick couplings up front, off a splitter that I fabbed up in place of the original spool valve on the steering column (see picture, not finished running lines to front yet), this will raise lower what ever is mounted up front with a cylinder mounted to the right side of tractor/sub frame when the deck is removed. (I had to remove the 1450 lift lug to have clearance for the left brake pedal). The lever to left of that will operate quick couplings on the left side front frame for power angle, power rotate for future use. Lever to the left of that one is for quick couplings in rear for tool operation as needed. And finally, the far left lever will operate the sleeve hitch I'm building there, so implements can be raised /lowered separately from mower deck if I chose to leave it on for a quick job.