Quote:
Originally Posted by IHinIN
My 100 had the same issue when I got it. I ended up having to rework the piece that attaches to the front of deck. Mine was bent and it made the deck hang low in front. I welded on the arm that runs up to the rockshaft at a slight angle to the arms running to the deck to raise the front of the deck. This is the only pic I can find that shows the angle. I also added a belt guide to keep the belt from flying off.
 |
Adam, I like your belt guide mod. I'm surprised that it wasn't something IH would have done considering the length of that PTO belt. One on each side wouldn't hurt.
Mike