Thanks guys..... now the bad - adjusted carb back to initial settings per the manual and it doesn't wanna start now. When I choke it then open the choke it hits but no start. Like I said earlier the throttle shaft seems to have a lot of play.
(1/16th or so probably) I used the cheap plug that came with rebuild kit, gonna replace that. Also didn't put in new points. Gonna do that. I used the best looking of the two sets I had. Plug wire I bought is toooo long and lays on the heat shield. Gonna pick up a shorter one. When I rebuilt the carb, I didn't soak in carb cleaner . Just used the spray stuff. Ok I know, .... I skimped on the external stuff a little and shouldn't have. But I'll get it!! Any advice?
|