Quote:
Originally Posted by DoubleO7
What I have done with great success on the narrow frame decks is:
Use a pipe wrench up close under the blade. You don't want to crush the "can" that is on some spindles between the blades and the deck itself.
Let it swing against the deck perimeter so that it will hold the spindle while you use the 1-1/8" wrench.
Put a cheater pipe on the 1-1/8 if needed.
The above has not been J-Mech approved.
 |
  I've always used an impact as well.
__________________
Daniel G.
.
(May 1970) 147 w/an IH spring assist, 48" deck, 42" blade, 1969 73, #2 trailer, 10" Brinly plow and (on loan) Dad's #2 tiller.
|