Well it turns out the right kit doesn't really have anything in it anyway, just a bowl and bolt gasket. I've now cleaned the carb twice and also cleaned the tank (screen was good) and installed an inline filter. the needle looks good under a scope and it seems to seat and seal. I've cleared the gas from the cylinder after each try but now it won't start at all. I've started with both screws at about 2.5 turns out and backed them out from there. Still think I'm getting too much gas, but it isn't coming out like it was before. I've got spark.
Whats my next step, experts? How do I check the float level?
__________________
Cub Cadet 2166
|