[geburns]

Hello,

I have inherited my Dad's IH 782 and slowly re-building. Completely rebuilt the mower deck, but now have issues with the PTO. I have searched for a technical manual on proper removal of the PTO, but no luck. Can someone direct me to a service manual, or provide specifics on the proper removal of the PTO Clutch?

The PTO switch tests OK, but when I apply 12V directly to the clutch there is no engagement. As a result, I need to remove and inspect. There is a screw in the middle of the PTO that will need to be removed, but noticed it is directly connected to the engine shaft which turns when attempting to remove the screw. Just want to verify the best way to restrict the shaft from turning when attempting to remove the front PTO screw.

Thanks,
George