IF....the wiring harness you bought is suppose to be correct, the PTO wires would be TAN.
So, let's say they are brown instead of tan. You will have one brown wire going to the Fuse (10A) and the other going to the PTO itself.
I have taken my diagram, and isolated the PTO circuit and eliminated all the other stuff. There are four wires going to the PTO Switch. Two Orange (Start Circuit) and two Tan (or brown) wires for the PTO Circuit.
AS A TEST....You could simply connect (jump or touch) the two brown wires together and the PTO should engage....PROVIDED... you have: A good Igntion Switch (in on position), good Fuse, and properly wired.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|