Quote:
Originally Posted by ed in cny
Ok as best I can guess the spiral pin is on the creeper shift arm. But where?
|
There is a pin in each end of the driveshaft. One in the coupling that is on the creeper gear. One in the driveshaft to the creeper coupler and one at the front that connects the clutch disc.
The two at the back end of the driveshaft are spirol pins and even if they shear, you can't tell by looking. You have to turn the driveshaft and watch the creeper gear coupler and input shaft to make sure you get the same rotation. Same way with the clutch plate end of the driveshaft. Make sure the creeper is engaged when you do this.