Quote:
Originally Posted by Matt G.
Just an FYI, you WILL destroy the lower bearing race doing this, so you'll be putting new bearings in the column if you proceed with that.
Soak it in PB Blaster or Kroil or something like that for awhile. Patience is key. I think I soaked this one for 3 or 4 days before I got it loose. The steering wheel is splined to the steering shaft. Here is the puller I made. I have only used it once, but it removed the most stubborn steering wheel I have ever encountered.
|
Matt, that's very possible. Mine didn't look good when I took it apart.
I was planning on rebuilding the whole unit anyway as it was VERY sloppy but I might have contributed to what all needed replaced.