[Hack.45]

Hi guys,

I just want to take a minute and update the 582 Vanguard re-power. I've only worked on the tractor here and there, so it took longer than I planned, but I've made significant progress. The engine is mounted and 90% of the wiring is done. I'm actually able to drive the tractor now, and I would like to finish the last two pieces of wiring this weekend. I'll post pictures this weekend when I pull it outside - the lighting is poor in my garage and I was too busy driving it this week to take pictures :-) I did attach two pictures of my finished clutch assembly.

I need help with two pieces of wiring and was hoping that someone can offer insight. First, I need to wire in the fuel solenoid. I just ran a hot wire from the battery for now. Any suggestions on what I can tie in to? Second, the PTO clutch plug has two wires and a two connection plug. My original clutch has just one wire. Any suggestions on what the second wire does and whether I can make the clutch work with my current wiring harness? I attached an image of my wiring schematic. The Vanguard engine was practically plug-and-play with the original wiring harness so nothing has been modified. Thanks for any help you can offer!