Cub - this morning I went back and pretty much started reading the service manual from page 1. The only real thing I've got accomplished today so far was tightening the speed control lever per the service manual. It looks like that has made a difference in my case. The manual calls for a wedge or keystock to help tighten the nut, but I ended up taking the wheel off and dropping the steering column so I could get a 1-1/16 open end wrench on it. It looks now like I'm just getting a little fight out of the hydro when I press and hold in on the brake. Hopefully the neutral adjust will take care of that...
__________________
Gary
'49 Farmall Cub, '62 "Original, '70 73 w/402-D Haban sickle, '71 127 w/38" cast end deck, '73 149, '76 Sof76, '07 LT1045 w/bagger, '09 GT2544 w/bunch of mods.
5 Exmarks, Kubota B2920, blah, blah, blah...
|