I went that route when I first got the tractor. I used the best original top mounts on the bottom and used the sway bar mounts on the top. The older mounts didn't last long. The ones I got from CC Specialties are a bit softer than the sway bar mounts. They require using the metal inserts. I don't know if you can get the inserts in the sway bar mounts. I tightened them down until I had one tread showing. I get almost no vibration but only have about an hour on them. I also replaced the rag joints, the swivels on the back and front, and the drive shaft with all new spiral pins. Put a new fan on also.
|