Quote:
Originally Posted by young enthusiest
149, take the tunnel cover off, there is a rod between the trunnion and the petal. I beleive it will have to be adjusted to be a bit longer.
|
No. He needs to download the service manual from the Tech Library and read up on the operational neutral adjust procedure.
Cub Cadet 123-
Basically, you need to remove the tunnel cover on the 149 and loosen the two bolts that hold the cam linkage bracket to the pump. The holes are slotted so the plate can be moved up and down. Move it all the way up, and tighten one of the bolts slightly so it can't move on its own. Put the tractor on jackstands so the rear wheels are in the air, and then start the tractor and put the lever in neutral. The wheels will probably be spinning. Using a hammer and brass rod, very carefully (stay far away from the cooling fan) tap the cam linkage bracket down until the wheels stop spinning. Shut off the tractor, tighten the bolts, and put the tunnel cover back on, and you're all set.