Thanks,
I have everything down to bare metal. I use a razor scraper (inspection sticker scraper ) on all the gasket surfaces. Then wire wheel. Then I file around everything, especially the bolt holes on the covers to make sure they are leveled out.
SCOTT
By #2, do you mean clear silicone?
And that looks nice. I just cant decide on painting mine black or yellow. For now it will be black as I am going to put a coat of POR-15 on it. Later I will either use some POR chassis black, or use the hardnose yellow.
JOE
__________________
Sold everything but one.
1211-snow pusher, cab ,54 inch plow, loaded tires (all 4) Gilson wheel weights, X-trac fronts- soon to have power steering and dual hydraulics
|