Quote:
Originally Posted by Matt G.
You would need to remove shims to reduce the pressure. I think my manual says that 782s are set at 600-700 psi, and the larger 982 at 7-800 psi. I wouldn't go a lot higher than 800, either.
|
The 982 pump had a relief valve set at what you posted. The pressures were increased on the later Cubs, 900+ IIRC as the 982 struggled to lift the tillers. This is one reason I went to the 1882 pump on my 982.
BTW...no sweat on the lift low, big difference.
Scott