Quote:
Originally Posted by ironman
Talk about timing, I was perusing my local C.L. this morning and ta-daa, this guy is dismantling a 2130 about 12 miles away. I contacted him about the shaft, hubs, and barrels and he said "come and get it for $20" and I did (plus some other junk). I have a 105 that needs the hydro fan replaced so I'm just gonna do this mod too. Thanks again Sam Mac for all the info.
|
Yep hard to beat $20.00 for the parts. I've also used 2000 series front wheels but you have to cut the hubs down 3/4" on one side and 1/4" on the other to fit the spindles for a narrow frame. 1st pic is before cutting 2nd pic shows the wheels on my 71/121.