Quote:
Originally Posted by DoubleO7
That accommodates the belt tensioner pivot/anchor eyebolt.
|
Yes it does.
Quote:
Originally Posted by DoubleO7
Does not the pulley hole in the tractor plate dictate the outer plate orientation?
And also disallow mixing of plates from QA__ to QA__A if there is a difference?
|
Those are the things I'm not sure of, but I believe either/or of the gear box mounting plates can be bolted to either/or Quick Attach bracket. I'm also thinking that if the gear boxes are bolted to their correct plates, the input shaft on the two gear boxes will not be in exactly the same location with respect to where they end up once the gear box plates are bolted to the Quick Attach bracket. (that should be clear as mud)
Quote:
Originally Posted by DoubleO7
What if the gearbox input pulley is different and bigger than original?
And how come O.P.'s 127 does not have the QA latch assembly?
|
The pulley thing is entirely possible.
Hard to tell from here but it doesn't look like there is any evidence that the frame in the picture ever had the QA latches. Could it be a frame from a 123 with a 1X4/5 or 1X6/7 grill shell bolted to it?