[Shrewcub]

Originally Posted by BThein

Ok ,I just went and looked at it again then at a diagram on Parts Tree .The charge pump does look very clean on the outside like it may have been out.So it looks like just two bolts on the front into the case ,do I just remove it and turn it 180 ?I think it's worth a try I do have a spare super pump also that is not in a tractor but the splines on the input shaft are not great would it better to just change it out and how do you know it it's upside down.Sorry for all the questions I just have never had one apart they are so tough even the most rat faced ones seem to work just fine with new fluid and filters .Oh and Lew ,I do have heat so not thinking it is frozen but thanks for the heads up .I added a pic I think I am looking at the right thing .

Bob

It does look cleaner. I bet the PO put a seal in it and put it on 180 out. And, yes take the 2 bolt out and spin it 180. There is a little tab on one side of the pump you can look at and tell if it is on correctly. I just can't remember which side it is on tho. If no one else chimes in tonight, I will pull my tunnel cover for you in the morning and look.