Rod End Size? Right or Left?
I have a bunch of worn rod ends on a 2084 I am working on and while it's apart I want to replace them and tighten up the steering. I intend to replace the ends on the P/S cylinder and both ends of both tie rods. From what I see for the parts blow up, all the ends are 1/2"x20 female thread but there is no mention if they are right or left. Will probably order them from McMaster-Carr unless my friend at the race shop can get me a better deal. Going to get the heavy duty greaseable ones since they are cheap enough. I may get them for the 2086 while I am at it.
|