IF...you have about 14VDC on the V/R output terminal and 12.3V at the battery, then there is a "line loss" to include: Bad wire, bad wire connection, high resistance switch contact, etc.
With the engine off, and the Ignition Switch in the run positive, you can measure the resistance between the V/R output terminal and the battery positive terminal. It should be zero ohms.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|