Nick
The bearing is not on the shaft far enough. It needs to be flush with the end of the shaft.
Lew
The brass button is not the problem. I have one on my 149 and it works just fine. It's dimensionally the same as the fiber POS.
Nick
Read this.
http://www.onlycubcadets.net/forum/showthread.php?t=9
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|