Quote:
Originally Posted by truckntran
Here's a shot of the 1250.. those three bolt heads forward of the step are the important ones.. They attach the front cylinder bracket. My 109 already has these holes....
Here's the 109 rockshaft arm that the cylinder pins to , in the second hole from the top. The bottom two holes are where the pivot for the lift bar attaches, if you look close you will see the arm is still there, just unbolted, as it is going on the 1250.
Clicking on either will take you to that picture in the album, there are a lot more pics in that album, the lift ones are mostly on page 6 and 7. If your quietline hydraulics look like these parts, they should work on the 169.. |
From the looks of the pictures that 109 is not in good shape.