Quote:
Originally Posted by zippy1
There is no obstruction.
Checked the wires and ground again. Put the starter in, turned the key and it stuck against the flywheel. Took the tunnel cover off and turned the engine backwards, removed the starter, let it go back in the neutral position, tried it and it started. I started and stopped it five six times with out any trouble.
Then tried it again, same sh&%! Seems like when it get's to a certain spot it locks (starter) against the flywheel.
|
Compression release not working right in the engine? Perhaps the starter doesn't have enough oomph to make it past the compression stroke either due to wiring (I know you checked it all) or the auto compression release isn't working. Just a thought.
