Quote:
Originally Posted by R Bedell
Todd:
I have done both, had mine rebuilt and bought new. IIRC, my rebuild was <$60.00.
I have bought two starters from these guys with much success.... Motor City Reman |
The big thing on mine is the bendings won't return. Go to start the tractor and it get's to the flywheel and stops. And won't return.
Make sense? No!
I turn the key, the starter engages the flywheel and you hear......well you hear it engage the flywheel. Look at it and it's stuck against it. Take it off and it goes back to it's normal position.
I cleaned it up last week when it did it the first time and it worked one time. Did the same thing over the weekend and it didn't work so good. Took the starter apart and cleaned the com out with compressed air, and electric cleaner. Brushes looked to be down to that mark on them.
PUT EVERYTHING BACK TOGETHER, dab of oil on the shaft, works smooth, put it back on the tractor, same crap.
I've got a good electric motor place up here....