You need to pull the Drive Shaft out. Replace any worn drive line parts (couplers, adapters, flec discs, bushings, etc) plus the fan.
Once the drive shaft is out, remove the Hydro Unit input shaft Adapters (pound out the spirol pin). Once removed, pull out the defective input shaft seal. Take that seal to your local Auto Parts store for cross reference, and obtain same. Install new seal.
Once you have all the drive line parts as needed, re-assemble the drive and install back into tractor.
Check you Hydraulic Fluid level and add if necessary.
Wha-La.......you are good to go.
__________________
[B]Roland Bedell[/B]
CC Models: 100, 105, 1450, 782, (2) 784, & 2072
[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
|