We also assembled our original hydro back on the tractor using ultra grey sealant and I filled the tranny today which is a real pain also. the 2072 has the battery in the fender pan but I hooked it up temp and ran the engine to pressurize the system and no leaks and have all systems operating. After an hour no leaks or puddles on the floor. I think we got ours fixed. After I get it back together completely I'll take it out and give it some exercise and we will see. I am wondering about the bearing that sticks out and seems to fit in a recess when assembled and wondered if that might have been our problem It would seem if one hydro bearing stuck out a fraction further one might not be able to get it tight enough. The hydro that leaks also came out of a 2072.
__________________
With my son, EricR Super 2084 with 54" mower, 451 blower. 2086 with 3 pt hitch, 54 inch deck, 551 blower, 54 in brinly blade. A 4 digit original w deck. A 70 with deck. 2 102s both with 42 in decks, one with creeper, 1 36 inch IH snow thrower CW36, 1 42 inch IH blade. 149 with mower. 2072 w 3 pt hitch, Johnny bucket, 60 in mower, 451 blower. Jacobson GT 10 with mower. DR Lawn vac tow behind,Home made lawn roller. Brinly cart, 2 off brand carts and 1 home made cart.
|