Cledford-
I just finished doing the exact thing Rbedell posted and it works fine. You can't use the steel inserts from the four "bad" ISO mounts because they are too big. They take a lot of wear too so make sure and use the four best inserts with the four best rubber bushings. The Moog rubber mounts I got came with cupped washers and I used one on each as the pic show. You can throw the torque spec out the window because it's not a rigid mount without the steel inserts. I just made sure the locking part of the nut (stover nuts) was secure on the threads and the rubber started compressing. If you do it this way you probably won't be able to tell any difference; I can't. You should also do the rail mod to assure a longer life of the work you're now doing.
Just another .02 worth...good luck.
|