you can remove the entire PTO and bearing and lock collar. the pulley that runs the starter gen belt is held on by a set screw. it isn't connected to the PTO in anyway. just remove the set screws from the PTO, knock it off, bearing, lock collar and your good!
__________________
Cubs: 2072 w/60" Haban, 782 w/Johnson 14 loader & 44" deck, & 169.
Others: Ford 120, Ford LGT100, Ford LGT125, 2 - Ford LGT145s, & 4 - John Deere 140, H1 and H3.
|