The following parts will interchange:
Carb
air cleaner
flywheel shroud
charging system
shields around block
coil
spark plug wire
spark plug
cam
governor-I wouldn't install a used plastic one....replace with a new gear-cheap insurance
crankshaft bearings
oil pan
flywheel should be ok...not 100% sure on that one
connecting rod-wouldn't put in a used one
I think a 14 and 16 horse power crankshaft have different counter weights. 14 horse power crank in a 16 horse power block could have major shaking problems because of the difference in the counter weights....not 100% sure on that one.
It would be cheaper in the long run to find a 14 horse power block.
|