Quote:
Originally Posted by gazoriginal
looks good, and gives me some ideas!. do you have the dimensions for the front of that- where it attaches to your sleeve hitch adapter.
|
The hitch piece is a 4.50" long piece of 4" x .25" wall tubing cut lengthwise about 3" wide with a 5/8" hole for the pin. There's a piece of 1/4" plate welded to it that extends down to the bottom of the 1.50" x 2" tubing. There are 2 gussets welded between the 1/4" plate and the bottom of the hitch piece.