[Rdrnek]

OK here it is. I noticed that the blue wire was unhooked from my VR, So I put a terminal on it and hooked it up to the VR to the terminal marked L. I noticed in the diagrams that the terminals should be marked B,G,and F. I don't know if that matters? Anyhow .. now as soon as I hook up the battery the starter starts cranking the neutral and pto safety switches are open. But if I disconnect the blue wire everything seems normal it starts and fires fine but I am not sure if the battery is charging.I have checked,double checked, and triple checked that all the right wires were connected to all the right places. any ideas guys?