Thanks guys. You never know when something like this will pop up. Should make a good working unit.
Here are some pictures as I attempt to put together a mule drive for a NF tiller set up.
These are as I wire brushed and inspected a mule drive that I had set aside a year ago. It had been through the electrolysis tank but had some surface rust and paint. Also the 1/2 inch rod was well worn and the horseshoe metal brackets had lots of wear at he pivot holes. I decided this needed to be repaired. I cut out the rod and welded and repaired the worn holes.
More pictures to come as the mule drive comes apart is repaired and reassembled.
Regards,
Chris
__________________
Casbohm Maple and Honey
www.mapleandhoney.com
Cubs: 147 R and the "train", 127 elec lift, 127, 125, 106, 102, 100, 86, 73, Brinly plow, Snow thrower, 2 Rototillers, several mower decks and several snow plows, #1 cart, Grandkids barrel cart.
|