Continued:
Power take off has small set screws at three locations with two screws at each location.
PTO clutch is removed.
Bearing for the PTO has a crack and piece missing. it will have to be replaced.
The lock ring has one set screw. Take it all the way out.
With a punch find the hole in the ring and tap clock wise when standing in front of the tractor. This ring is eccentric and will loosen to allow the bearing to be removed.
A small two jaw puller will fit in the space to pull the bearing after the lock collar is loose.
continued in next post.
__________________
Casbohm Maple and Honey
www.mapleandhoney.com
Cubs: 147
R and the "train", 127 elec lift, 127, 125, 106, 102, 100, 86, 73, Brinly plow, Snow thrower, 2 Rototillers, several mower decks and several snow plows, #1 cart, Grandkids barrel cart.