I am assuming the 2-1/4 turns are from the closed position or counter clockwise? I did notice that I was using a lot less gas than before the rebuild.
It has plenty of power and runs good, and always starts easy.
I am using OEM gaskets and the heads were flat when first installed.
How would you use timing light on tractor? I do have a timing light
New piston, rings, valve guides, valves ground and seated, cylinder honed, and installed used carb 'cause mine had too much play on shafts.
Thanks for your help!
P.S. It's a 10 H.P. not a 12 H.P.
|