Cub 1650 help!!
I replaced the carb on my 1650, it ran great, then the next morning found that it was leaking fuel. I heard that aftermarket carbs, had issues with the float needle, so I replaced it with the old one, and it solved the problem. I went to make minor adjustments at idle and full throttle and now it will not run at full throttle. It idles fine, but starts to bog down and run terrible as you increase the throttle. I swapped carbs and it does it with both. I checked the timing using an ohmmeter and it is fine. I heard someone mention that a bad condenser might be the cause? Any thoughts?? Please help.
|