Quote:
Originally Posted by generalbegg
Thanks for the quick reply's everyone! I've been doing a ton of searching today and my list is growing! Ag tires, wheel weights, new headlights, fill tires with fluid ect. This is going to be a fun winter of projects! I was able to find the info on the transmission by searching for "hytran" as bolivier suggested! I also found Jeff's thread with the parts and will be contacting him soon!
As I stated this little tractor runs very well but I do notice it burning some oil, not much, but it is happening. Should I do anything else other than the seafoam I've added for now? I've seen some "de-carbonating" threads. Should I invest that time, or just change the fluids and put this bad boy to work?
|
Make sure you use a straight 30W non detergent oil. I use Rotella but any non detergent 30W quality oil will be fine.
Thanks for considering my parts
http://www.onlycubcadets.net/forum/s...ad.php?t=20875
Since I custom build each sleeve hitch adapter, I will make exactly what you want. Some folks like the drilled lift straps, some prefer the slotted, you can either or both. I make an extended lift pin that has two sets of 1/2" holes so the same pin can be used for the tiller and for plowing. All you need to do is pull the cotter pin and rotate the pin 90* in the rear lift casting.
Jeff