Dash tower question
I have a 124 I'm restoring and my dash tower is in pretty bad shape. So I bought one on eBay and it was supposed to come off of a 124, but after receiving it, it looks like a 126 tower. It's about a inch and a half taller and a half of an inch larger hole for the steering column. My question is will I have to get a different steering column for this to work or is the 126 basically the same tractor than the 124. Im going to have to trim the top of the tower so the fiberglass top will fit. But I'm not sure if I should start cutting on this thing to get it back down a inch and a half and take the top off of the 124 and tack it onto the 126 tower. I need some help man. Thanks
|