[cdlong]

I got the shifter adjusted as close to neutral as I could. I jacked up both rear wheels. Tractor was warmed up and I adjusted neutral. With the tractor in forward and brakes applied, then released, the wheels stop turning. With the tractor in reverse, then the brakes applied and released, the wheels keeps spinning, rite faster than the left. If I hold the brake pedal down, the rite wheel keeps spinning. I turned the linkage from the shifter to the cam in both directions and I couldn't get the tires to stop spinning. What am I missing here? 1st left pic is jacked up, 1st rite is forward to neutral, after brakes were applied and released, 2nd down left is reverse to neutral, brakes applied then released. 2nd down on rite is reverse to neutral, brakes applied and held down. 3rd now on left is neutral. I couldn't get a picture of the frustration.