Hey cubby! I read thru your other post on your issues. Have you checked that float yet?? If you have fuel freely flowing thru the carb (as you stated in your other post) there is a problem in your carb. (float, stuck needle valve?) Also, your last post in your original thread says that it sounds like the engine is running while your turning it over, but won't continue when you let off the key. That could be a timing issue or a stuck valve issue?
Check out that carb & float! Check your compression (borrow if you don't have one). I'm a bit analytical and will sometimes bury myself in the details, you know, miss the forest because of the trees! I was having trouble getting my Chevelle tuned and a buddy told me, "It's only a gasoline engine. You have fuel delivery, spark, and timing. What's so hard?"
Good luck and give us some details on what you've been doing.
__________________
Kubota B7100 HST 4x4 w/FEL, 4' Bush Hog, Woods RM400 Finish Mower
Original Member #54
|