Ken
The 72 is the rag joint type, the 82 is the CV type. Problem with the 82 style is they have splines on the ends to fit into the CV joint and they are a PITA to shorten and get them straight. I'm going to try using a 2000 series shaft. I can cut it, put a section of 5/8" shaft inside and then drill it and pin it for what ever length I need. I've done this on the JD dumper I built last year and so far it's working.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|