Welcome to OCC.
First thing, check the pedal shaft on each end (inside the frame rails) to make sure that a spiral pin hasn't slipped partly out of it's hole and jammed itself against the inside of the lip on the bottom of the frame rail.
If that isn't the problem, and it were my tractor, I would get a long, heavy punch or drift and a heavy hammer, and hold it (the punch/drift) against the ends of the shaft and try to knock the shaft back and forth in the frame, just to see if you can get any kind of movement out of it. It will not move much (because of the spiral pin that keeps it in the frame).
If you pry on the pedal... You will break it off.
Good luck
__________________
More IH Cub Cadet Parts RIGHT HERE
|