I will when I take it off to paint it. It's no big deal 2 pieces of 2" X 2" 3/8" bar stock with a 1/2" hole in it so that the pin that would normaly hold the rear lift will fit through. One welded on each side of the plate. The plate is 3/8" and it's 6" X 6 1/2" +- I like to keep things simple.
__________________
2264 with 54 GT deck
1641 AKA Black Jack with a 402-E Haban Sickle bar mower
JD317 dump truck
BX2670 with FEL
|